Snappy® Pitless Adapter - Baker Manufacturing Company

Snappy^® Pitless Adapter

The Snappy is manufactured from lead-free galvanized cast iron. Snappy pitless adapters are certified under the standards of the Pitless Adapter Division of the Water Systems Council (PAS-l). Snappy pitless adapters are available for well sizes from 4"to 6 1/4" I.D. and is for drop and discharge pipe sizes of 1" and 1-1/4". Snappy adapters conform to Water System Council PAS-97(04) Standards.

SNAPPY^® PITLESS ADAPTER

		1" Drop Pipe & Discharge		1 1/4" Drop Pipe & Discharge
Well Size I.D.	Min.-Max. I.D.	Order No.	Wt.	Order No.	Wt.
4"	3.981-4.130"	8PL41U	10	8PL41.2U	11
4"	3.981-4.130"	**8PL41U/3	30	**8PL41.2U/3	33
4 1/2"	4.444-4.607"	8PL4.31U	11	8PL41.31.2U	12
5"	4.991-5.166"	8PL51U	12	8PL51.2U	12
5 3/16"	5.137-5.286"	8PL5.21	12
5 3/16"	5.137-5.286"	8PL5.25.61U	10
6"	5.906-6.201"	8PL61U	14	8PL61.2U	14
6 1/4"	6.189-6.367"	8PL6.21U	14	8PL6.21.2U	14
** 3-Pack

Note: To order Snappy Units with TAPPING for AT-THE-WELL controls INSERT the letter "P" after the number indicating the well size. Example: 8PL4P1U.

ILLINOIS & MICHIGAN SNAPPY PITLESS ADAPTERS (PRESSURIZED)

The Pressurized Snappy is equipped with dual o-rings on the casing fitting to insure a watertight seal at the well and to meet Illinois and Michigan code requirements.

Well Size I.D.	Min.-Max. I.D.	Order No.	Drop Pipe & Discharge Size	Wt.
4"	3.981-4.130"	8PL04P1	1"	12
5"	4.991-5.166"	8PL05P1.2	1 1/4"	13
6"	5.906-6.201"	8PL06P1.2	1 1/4"	15

Note:Note: To order Snappy Pitless adapters with tapping for at-the-well controls, replace the " 0" with " T" in the ordering number. Example: 8PLT4P1.