Baker Manufacturing Company - STANDARD INDUSTRIAL PITLESS UNITS

PRINT THIS PAGE

BACK TO HOME

10” I.D. STANDARD INDUSTRIAL PITLESS UNITS

Ordering Information

Industrial Specifications

Parts Breakdown

DESCRIPTION - ORDERING NUMBERS

Bury Depth in Feet

Pitless Unit for Submersible Pump

Well Size - Ins.

Upper Case Size - Ins.

Attachment to Well Casing

Black Upper Case

Watertight Cap w/Screened Air Vent

Pressure Equalizing Spool Passages

No. of Check Valves: (0)

Drop Pipe I.D. Ins.

I	T	Threaded NPT Std. Connection	Accessory Discharge Connections
		Flange, ASA 150#
		Welded
		Mech. Joint w/transition sleeve

Discharge I.D. Ins.

Std. Industrial

Elec. Cable Seal (S)

O.D. 3 Wire____O.D. Grounding Wire____

Probe Tube (P)

Water Sampler Valve (H)

Flowing Well (F)

Special Provision (X)

EXPLANATION OF PITLESS UNIT
ORDERING NUMBERS
The diagram illustrates the meaning of the various letters and numerals used in Monitor Standard Industrial Pitless Unit ordering numbers. A typical order number and the pitless unit it stands for are shown.

Typical Order Number
3PS1012WBWE06T6ES

3	A. The first numeral in the order number indicates the bury depth, in feet. Bury depth on all units is measured from the center of the discharge line to ground level. The top of the pitless case extends 12” above ground level as is required by many codes. However, any length can be manufactured.
PS	These letters indicate the type of pump the pitless unit is designed for. The unit shown is a PS for submersible pumps.
10	B. This numeral indicates the well casing size, 10 ” I.D.
12	C. This numeral indicates the upper pitless case size, 12 ” I.D.
W	D. Indicates the attachment to the well casing is a welded joint.
B	E. Indicates the upper pitless case is black pipe.
W	F. Indicates the unit has a watertight cap with screened vent installed.
E	G. Indicates spool has pressure equalizing passages, for venting well.
0	This numeral indicates the type of spool which the pitless unit has. In this case it is a spool having no silent check valves.
6	H. Indicates the size of drop pipe in inches.
T	I. Indicates the discharge connection is threaded.
6	J. Indicates the size of discharge pipe in inches.
E	Indicates Standard Industrial
S	K. Sealed Conduit Connection. (Optional)